Etherea-MX: one console, eight handpieces.
The do-everything laser and light platform: swap plug-and-play handpieces to cover hair removal, vascular, pigment, tattoo, resurfacing, and tightening from one system — for licensed providers and practice owners building a multi-treatment menu.
- Modality
- Multi-application laser and light, up to 8 plug-and-play handpieces
- Manufacturer
- Vydence Medical. Eventide is a United States distributor, not the manufacturer.
- Regulatory
- The manufacturer states 70+ FDA-cleared treatments across the handpiece range. The cleared indication depends on the handpiece fitted; verify with the manufacturer before purchase.
- What it costs
- Quoted per configuration. Purchase, lease and rental are all priced in the same quote.
One expandable chassis, or five separate rooms
The whole argument for this platform is that a base console can grow into six treatment lines instead of six purchases. That argument is worth exactly as much as your ability to keep the console busy.
one console, six revenue lines. That is the whole argument for this platform.
Practices that want one chassis to expand
- You want several treatment lines and have one room to put them in.
- You would rather start with two handpieces and add the rest as demand proves itself.
- Your menu spans categories — hair, vascular, pigment, resurfacing, tightening — rather than going deep on one.
- You already run a ZYE ALX or ZYE YAG: both accept the same handpieces.
What a multi-application console costs you
- One console is one point of failure. Service on the platform takes every treatment line down at once.
- Cleared indications are per handpiece, not per platform — the 70+ figure is the range's, not any one configuration's.
- A high-volume single-treatment practice may out-book one console; a dedicated platform can be the cheaper answer.
- Handpiece swaps are fast, but they are still a step in every mixed treatment day.
Operators buy it anyway because one chassis puts a five-category menu in one room, and every handpiece added in year two is a new treatment line the room never had to be rebuilt for.
Four questions worth asking us
- Which handpieces carry the clearance for the treatments I intend to bill?
- What does the base console cost against the configuration I actually need?
- What is the current warranty term, and what does service cost after it?
- What does adding a handpiece in year two cost against buying it now?
One console, eight physical technologies
Etherea-MX is not one laser with settings. Each handpiece is a distinct emitter — different lasing medium, different wavelength, different pulse physics — sharing one power supply, one interface and one footprint. Where energy lands is set by which chromophore absorbs it, and the damage pattern is set by pulse duration: the same wavelength behaves differently at 530 picoseconds, 20 nanoseconds, 10 milliseconds and 10 seconds. That range across the handpiece set is what lets one console cover pigment, ink, vessels, resurfacing and tightening. Handpieces and spots are hot-swapped and the console runs 110–220 V full-range, so a base configuration can be expanded rather than replaced as the menu grows.
- IPL-Sq400–695 nm
- IPL 400–695 nm cut-off filters — vascular lesions, hair removal, pigmented lesions, acne
- ProDeep1,340 nm
- Nd:YAP 1,340 nm non-ablative fractional, deep mid-dermis reach — tightening, wrinkles, scars
- handPICO1,064 / 532 nm
- Picosecond 1,064/532 nm — tattoo removal, melasma, pico toning, stretch marks
- Acroma-QS1,064 / 532 nm
- Q-switched Nd:YAG — pigmented lesions & tattoo
- DualMode2,940 nm
- Er:YAG 2,940 nm — ablative resurfacing
- intenseIR850–1,800 nm
- 850–1,800 nm infrared — skin tightening
- Er:Glass1,540 nm
- 1,540 nm non-ablative fractional — texture & rejuvenation
- Vascutipsapplicators
- Dedicated applicators for fine vascular work
IPL-Sq®
400–695 nmBroadband light across six cut-off filters
Digital, microprocessed IPL with constant Square-Wave Pulse® delivery. Ships with the exclusive VascuTips® for small lesions and a 40×12 mm ultracooled sapphire spot with an anti-scattering shield.
- Wavelengths
- 400, 515, 540, 580, 640, 695 nm via cut-off filters
- Fluence
- up to 33 J/cm² (Etherea-MX) · 30 J/cm² (ZYE)
- Pulse
- up to 100 ms · up to 2 Hz (3 Hz on ZYE)
- Spot
- 40×12 mm · VascuTip® 12×12 mm · VascuTip® 8 mm round
- Cooling
- contact sapphire, 5 levels, down to 2 °C
Vascular lesions · pigmented lesions · hair removal · acne
ProDeep®
1,340 nmThe deepest non-ablative fractional wavelength on the platform
A Nd:YAP non-ablative microfractional handpiece with a deeper penetration range than other fractional non-ablative lasers, creating controlled bulk heating from the inside out.
- Technology
- Nd:YAP non-ablative, microfractional, multi-layer
- Fluence
- up to 200 mJ/mtz
- Pulse
- 3, 5 and 10 ms · up to 2.5 Hz
- Spots
- 8×8 mm 100 mtz/cm² · 10×10 mm · 6 mm round
- Cooling
- built-in air cooling, hands-free adapter
Tissue tightening · wrinkles · scars · acne
handPICO®
1,064 / 532 nmFractional picosecond pulses for pigment and ink
The first fractional picosecond handpiece designed for a multi-application platform, with two wavelengths and five spot sizes for all skin types year-round.
- Technology
- dual-wavelength, multi-pulsed fractional picosecond
- Fluence
- up to 7 J/cm²
- Pulse
- 530 ps and 2.5 ns · up to 10 Hz
- Spots
- 1,064 nm: 3, 5, 7 mm · 532 nm: 3, 5 mm
Tattoo removal · pigmented lesions · melasma · pico toning · scars
DualMode®
2,940 nmEr:YAG resurfacing with a CO₂-like effect
Dual-pulsed ablative Er:YAG combining ablative, ablative/coagulative and coagulative pulses in one handpiece, plus non-fractional spots for small lesions and an intraoral tightening spot.
- Technology
- Er:YAG ablative, dual-pulse microfractional
- Fluence
- up to 8 J · up to 5 Hz
- Spots
- 8×8 mm 100 & 400 mtz/cm² · 2.5 and 6 mm round
- Cooling
- built-in smoke evacuator + air-cooling adapter
Skin resurfacing · rhytides · perioral and periocular work
ACROMA-QS®
1,064 / 532 nmQ-switched nanosecond energy for stubborn pigment
A dual-rod, ultrashort-pulsed q-switched Nd:YAG and KTP handpiece delivering up to 1,500 mJ at 20 ns across five spot sizes on all skin types.
- Fluence
- up to 1,500 mJ
- Pulse
- 20 ns · up to 5 Hz
- Spots
- 1,064 nm: 3, 5, 7 mm · 532 nm: 3, 5 mm
Laser toning · tattoo removal · pigmented lesions · melasma
LongPulse®
1,064 nmMulti-pulsed Nd:YAG for deep vascular work
A high-fluence multi-pulsed Nd:YAG handpiece for deep vascular lesions of the legs and face that also delivers mild laser toning on all skin types.
- Fluence
- up to 500 J/cm²
- Pulse
- 0.3 to 60 ms · up to 10 Hz
- Spots
- 2, 3, 6 and 9 mm
- Cooling
- built-in air cooling, hands-free adapter
Vascular lesions · telangiectasias · rosacea · poikiloderma · hair removal
intenseIR®
850–1,800 nmBroadband infrared for light-based tightening
A high-powered halogen infrared handpiece delivering up to 130 J/cm² over a 30×10 mm area, with intense, mild and light modes for face or body in a single applicator.
- Fluence
- up to 130 J/cm²
- Pulse
- 3 to 10 seconds
- Spot
- 30×10 mm
- Cooling
- contact sapphire, 5 levels, down to 5 °C
Skin tightening, face and body
GoSmooth®
1,540 nmEr:Glass for mild, low-downtime rejuvenation
The long-standing non-ablative fractional Er:Glass wavelength for soft, well-tolerated treatments — the gentlest resurfacing route on the platform.
- Technology
- Er:Glass non-ablative, microfractional, single-layer
- Fluence
- up to 95 mJ/mtz
- Pulse
- 10 and 15 ms · up to 1 Hz
- Spots
- 8×8 mm 100 mtz/cm² · 10×10 mm 400 mtz/cm²
Skin rejuvenation · wrinkles · pigmentation · scars · stretch marks
What the platform is, line by line
Specifications are provided by the manufacturer. Treatment lists on this page describe how licensed providers use each handpiece; cleared indications vary by handpiece and are stated in every quote.
| Specification | Value |
|---|---|
| Console type | Multi-application laser and light platform, up to 8 plug-and-play handpieces |
| Wavelength range | 400–2,940 nm across the handpiece set |
| Pulse range | 530 picoseconds to 10 seconds, by handpiece |
| Power supply | Full-range 110–220 V, so the console fits most US treatment rooms |
| Expansion | Handpieces and spots are hot-swapped; a base configuration is expanded rather than replaced |
| Accessory | Siberian-FIT, the −30 °C air-chiller, is compatible with the Etherea-MX and ZYE handpieces |
Six treatment lines from a single footprint
Providers use the Etherea-MX to cover the categories below — a single console that can open several revenue lines at once.
- Laser hair removal
- IPL with cut-off filters for hair removal work alongside the platform's other handpieces.
- Vascular, pigment & acne
- IPL 400–695 nm cut-off filters and dedicated vascular applicators for lesions, pigment, and acne.
- Tattoo removal & toning
- Picosecond 1,064/532 nm and Q-switched Nd:YAG handpieces for tattoo, melasma, pico toning, and stretch marks.
- Ablative & non-ablative
- Er:YAG 2,940 nm ablative resurfacing plus 1,540 nm non-ablative fractional for texture and rejuvenation.
- Skin tightening
- 850–1,800 nm infrared and Nd:YAP 1,340 nm non-ablative fractional with deep mid-dermis reach for tightening, wrinkles, and scars.
- Grows with the practice
- Start with the handpieces your menu needs and add more as demand grows — up to 8 on one console.
The published and documented record
Sources are the manufacturer's product literature, clinical casebook and published practitioner commentary, reproduced here so you can evaluate the platform before you buy.
| Source | What it says | What it does not establish |
|---|---|---|
| Manufacturer regulatory statement | The manufacturer states more than 70 FDA-cleared treatments across the handpiece range. | The specific cleared indication depends on the handpiece fitted. The figure is the range's, not any one configuration's; verify current clearances with the manufacturer. |
| Vydence clinical casebook | A published casebook records treatment parameters (wavelength, spot, fluence, pulse width, session count) contributed by named physicians including Valeria Campos MD, Alexandre Filippo MD, Guilherme Bueno MD and Juliana Dantas MD. | A casebook is documented practice, not a controlled trial. It reports parameters used, not comparative efficacy or a result for any patient. |
| International KOL commentary | Neil Sadick MD, Maurice Adatto MD, Hugues Cartier MD, Christine Dierickx MD and Stephen Eubanks MD have published commentary on the platform, with the ProDeep® 1,340 nm handpiece repeatedly singled out as the differentiator. | Practitioner commentary is expert opinion. It is not a clinical endpoint and is not evidence of a cleared indication. |
| Installed base | The manufacturer reports more than 3,000 platforms placed across 30+ countries, with a two-year comprehensive warranty. | Placement volume is a commercial figure, not a safety or efficacy one. Warranty terms are current at the date of the quote. |
Treatment lists describe how licensed providers use each handpiece; cleared indications vary by handpiece and are stated in every quote. Nothing here claims a result for any patient. What the record does give you is a range with a named, published parameter set behind it — the difference between buying a console and buying a protocol library your clinical lead can start from in week one.
What it costs to buy, and what it costs to run
A laser that sits idle loses money. The support around the device is what turns capital into revenue — handled by the same team that sources your pharmacy and biologics.
I sell the install and the training as hard as the console. An idle laser is the only bad outcome here.
- Price and financing
- Platforms like this do not carry a sticker price. Configuration, applicators, training and term all move the number, so the question that actually matters is the monthly. Most device financing here lands near $2,500 per month, pending configuration, credit approval, rates and terms. Purchase, lease and rental are all priced in the same quote. Weighing the options? Read Buy vs. lease your first laser.
- Installation and site prep
- Voltage, footprint, and installation handled — full-range 110–220V platforms fit most rooms. Site prep, voltage and footprint checks are handled before delivery.
- Clinical training
- Hands-on protocols and KOL-backed education so staff are treating confidently from day one.
- Warranty and service
- Warranty and service terms are set by the manufacturer and vary by platform — the current terms are included in every quote. Eventide remains your single point of contact after installation.
- Upgrade path
- Start with a base platform and add handpieces or modules as the practice expands, instead of buying a second console.
- Who it is sold to
- This is a business-to-business page. Etherea-MX is sold to licensed medical providers and the practices they operate, not to consumers, and nothing here is directed at patients. We support clinics in all 50 US states.
What buyers ask about the Etherea-MX
Is financing available for the Etherea-MX?
Yes. Leasing and financing are structured to your practice so the platform pays for itself as it books. Every quote includes transparent pricing, financing terms, and an ROI view. If you are weighing purchase against a lease, start with our guide, Buy vs. lease your first laser.
Are training and installation included?
Yes. Site prep, voltage, and installation are handled — full-range 110–220V platforms fit most rooms — and clinical onboarding with hands-on protocols and KOL-backed education is included, so staff are treating confidently from day one. One point of contact covers quote, install, and training.
What about warranty and support?
Warranty and service terms are set by the manufacturer and vary by platform — the current terms are included in every quote. Eventide remains your single point of contact after installation, coordinating service and support with the same team that handles your other supply lines.
What is the Etherea-MX's regulatory status?
The manufacturer states 70+ FDA-cleared treatments on the Etherea-MX platform. Treatments listed on this page describe how licensed providers use the platform, not cleared indications. Verify current clearances and indications with the manufacturer before purchase.
How much does an Etherea-MX cost?
It depends entirely on how many handpieces you configure — that is the point of the platform. Purchase, lease and rental are all on the table. We quote a base console plus the handpieces your menu actually needs, and you can add more later without replacing the console. Most practices ask for the monthly rather than the sticker, and device financing here typically lands near $2,500 per month, pending configuration, credit approval, rates and terms.
How many handpieces does the Etherea-MX take?
Up to eight solid-state laser and light-based handpieces: IPL-Sq®, ProDeep® 1,340 nm, handPICO®, DualMode® Er:YAG 2,940 nm, ACROMA-QS®, LongPulse® 1,064 nm, intenseIR® and GoSmooth® 1,540 nm. They are plug-and-play, so the platform can be upgraded as the practice grows.
Can the Etherea-MX treat darker skin types?
The manufacturer positions the platform as able to treat every skin type year-round, because the handpiece set spans wavelengths and pulse durations rather than relying on one. The right handpiece and parameters for a given Fitzpatrick type is a clinical decision made by your provider — it is covered in clinical onboarding.
Who distributes Etherea-MX in the United States?
Eventide Aesthetics & Wellness distributes Etherea-MX to licensed providers and practice owners across all 50 US states. Etherea-MX is manufactured by Vydence Medical; Eventide is a distributor, not the manufacturer, and handles the quote, financing, installation, clinical training and ongoing support.
How do I buy Etherea-MX for my clinic?
Start with a 15–20 minute call. We scope your space, budget and treatment menu, then send pricing, financing terms, spec sheets and an ROI view before you commit. After you order, site prep and installation are handled and your staff get hands-on clinical onboarding. Call 813-544-7131 or email justin@eventideaw.com.
Specifications and regulatory status reviewed 24 July 2026 by Justin Messner, Co-Founder, Eventide Aesthetics & Wellness.
Important information for providers. "FDA-cleared" appears only where verified: the manufacturer states 70+ FDA-cleared treatments on the Etherea-MX. Treatments listed describe how licensed providers use the platform, not cleared indications. Eventide Aesthetics & Wellness is a distributor, not a manufacturer. Product specifications are provided by the manufacturer. No treatment outcome is claimed or guaranteed. For licensed medical providers.