CoolMax Pro MultiPlex: three lasers, one console.
Diode, IPL/OPT, and Nd:YAG technologies in one console. Providers use it for hair removal, skin rejuvenation, pigment, vascular, carbon-peel, and tattoo work — for licensed providers and practice owners with limited space and budget.
- Modality
- Three technologies on one chassis: a four-wavelength diode (755/808/940/1,064 nm), SHR/IPL with OPT across seven filters (480–750 nm), and q-switched Nd:YAG (532/1,064/1,320 nm)
- Manufacturer
- Part of the CoolMax Pro series distributed by Solunis Medical. Eventide is a United States distributor, not the manufacturer.
- Regulatory
- The catalog records no clearance statement for the MultiPlex, and this page adds none. Documentation is provided with the quote.
- What it costs
- Quoted per configuration, against what a comparable three-device stack would cost. Leasing and financing are structured in the same quote.
Three technologies on one chassis, or three separate purchases
The argument for the MultiPlex is that a diode stack, an OPT-controlled flashlamp and a q-switched Nd:YAG arrive as one console instead of three. What you trade for that is one service call, one schedule and one queue across all three lines.
three technologies on one chassis instead of three separate purchases. That is the whole argument here.
Practices buying menu breadth, not depth
- You want hair removal, IPL work and pigment or tattoo on the menu, and one room to put them in.
- Space and budget are the binding constraints, rather than volume in any single treatment line.
- You would rather buy one chassis now than three consoles over three years.
- Your hair-removal population spans skin types I–VI and hair from thick, black and coarse to fine, gray and blond.
What this console does not settle
- No cleared indication is stated on this page for the diode, the flashlamp or the Nd:YAG. The documentation arrives with the quote, not before you ask for one.
- One console is one point of failure. Service takes the hair, IPL and pigment lines down together.
- The flashlamps are rated 400,000–500,000 shots. That is a consumable interval, not a lifetime.
- Two of the seven SHR filters — 560 nm pigmentation and 750 nm bold hair removal — are listed as optional, and the manufacturer's own parameter table names only the other five. The full seven-filter set is a configuration question rather than a given.
- Three handpieces share one schedule: a full hair-removal day is a day the Nd:YAG is not earning.
What gets bought regardless is the breadth behind one door — fourteen selectable wavelength settings, so hair, IPL and pigment days can be booked into the same room from the week it lands.
Four questions worth asking us
- Which of the seven SHR filters ship with the console, and are the two optional ones — 560 nm and 750 nm — among them?
- What documentation comes with the quote, and what does it record about this platform's regulatory status?
- What do replacement flashlamps and diode bars cost, and who fits them?
- What is the current warranty term, and what does service cost after it?
Three emitters solve three different problems
MultiPlex is a genuine three-technology console: a diode stack, an OPT-controlled flashlamp and a q-switched Nd:YAG. Each exists because the others cannot do its job. The diode carries depth and repeatability — four wavelengths fire from the same 4 cm² applicator, so a single pass carries both the shallow-absorbing and deep-penetrating parts of the spectrum. Optimal Pulse Technology shapes the flashlamp output into a uniform square wave, where conventional IPL fires with a leading energy spike and decay, putting the energy in the therapeutic window instead of the dangerous one.
The q-switched arm exists for pigment and ink, where the mechanism is photoacoustic fracture at very short pulse widths rather than bulk heating. Behind all three sits a 3,000 W supply, UK-imported lamps rated 400,000–500,000 shots and repetition to 10 Hz — the specification set of a device meant to run all day rather than occasionally.
- Diode755 / 808 / 940 / 1,064 nm
- Four wavelengths from one 4 cm² applicator — hair removal across skin types
- SHR / IPL OPT480–750 nm · 7 filters
- Broadband pulsed light — skin rejuvenation, acne, pigmentation, vascular therapy
- Nd:YAG532 / 1,064 / 1,320 nm
- 532 / 1,064 / 1,320 nm q-switched — tattoo removal, carbon peel, nevus of Ota, birthmarks, freckles
Diode laser handpiece
755 / 808 / 940 / 1,064 nmPermanent hair reduction across skin types
Twelve laser bars with four wavelengths integrated in the same applicator and a large 4 cm² spot for quick passes across all skin types I–VI and hair from thick, black and coarse to fine, gray and blond.
- Wavelengths
- 755, 808, 940, 1,064 nm
- Spot
- 4 cm² (20×20 mm)
- Source
- 12 laser bars
- Fluence
- 0–120 J/cm²
- Rate
- 1–10 Hz
Hair removal on all skin types
SHR OPT handpiece
480–750 nm · 7 filtersBroadband light with seven swappable filters
Fires up to 10 shots per second (1–10 Hz) at 1–50 J/cm² with uniform square-wave pulses and no peak-energy spike or decay, through a 15×50 mm spot. Filter selection sets the indication, and the manufacturer lists two of the seven as optional.
- 480 nm
- vascular therapy
- 530 nm
- skin rejuvenation
- 560 nm
- pigmentation therapy (optional)
- 590 nm
- wrinkle removal
- 640 nm
- hair removal, light
- 690 nm
- acne therapy
- 750 nm
- hair removal, bold (optional)
- Lamp life
- 400,000–500,000 shots
Vascular · pigment · rejuvenation · acne · hair
Nd:YAG handpiece
532 / 1,064 / 1,320 nmPigment, ink and toning
Three q-switched wavelengths to 1,500 mJ: 532 nm for light-colored pigment (shallow red, brown, pink), 1,064 nm for deep-colored pigment (black, blue, scarlet, deep coffee), 1,320 nm for rejuvenation and skin-tone work.
- Wavelengths
- 532, 1,064, 1,320 nm
- Energy
- 1–1,500 mJ
- Rate
- 1–10 Hz
Tattoo removal · pigmented lesions · toning
What the console is, line by line
Specifications are supplied by Solunis Medical. Treatment lists describe how licensed providers use the platform.
| Specification | Value |
|---|---|
| Console type | 3-in-1 laser platform — three handpieces on one chassis |
| Modules | Four-wavelength diode · SHR/IPL with OPT square-wave delivery · q-switched Nd:YAG |
| Wavelengths | Diode 755, 808, 940, 1,064 nm · Nd:YAG 532, 1,064, 1,320 nm · SHR 480, 530, 590, 640, 690 nm, with 560 nm and 750 nm filters listed as optional |
| Spot size | Diode 20×20 mm (4 cm²) · SHR 15×50 mm |
| Repetition rate | 1–10 Hz on all three modules |
| Energy | Diode 0–120 J/cm² · SHR 1–50 J/cm² · Nd:YAG 1–1,500 mJ |
| Power supply | 3,000 W |
| Voltage | 220 V/50 Hz, 110 V/60 Hz |
| Display | 15.6" colour touch LED display |
| Laser bars | USA-Coherent laser bars, 12 per diode applicator |
| Flashlamps | UK-imported, rated 400,000–500,000 shots |
| Cooling | Water, air, semiconductor and cooling gel |
| Shipping | 118 × 68 × 64 cm, 70 kg packed |
Six treatment lines from three modules
Each module opens its own menu — together they cover the highest-demand services in one footprint.
- Hair removal, all skin types
- Four diode wavelengths — 755/808/940/1,064 nm — plus the 640 nm and optional 750 nm SHR filters, which providers use for hair removal across skin types.
- Rejuvenation, acne & vascular
- Broadband pulsed light through the 480, 530, 590 and 690 nm filters, which providers use for vascular therapy, skin rejuvenation, wrinkle work and acne.
- Tattoo & pigment
- 532/1,064/1,320 nm q-switched Nd:YAG, plus the optional 560 nm SHR filter, which providers use for tattoo removal, carbon peel, nevus of Ota, birthmarks, and freckles.
- One footprint, many lines
- A single console that can open several revenue lines at once.
What is documented, and what is not
Everything below is a supplier statement about how the console is built and what arrives with a quote. There is no trial, no casebook and no clearance in this table, and the third column says so in each row.
| Source | What it says | What it does not establish |
|---|---|---|
| Component sourcing | Supplier statement: USA-Coherent laser bars, UK-imported flashlamps rated 400,000–500,000 shots, water and semiconductor cooling. | A sourcing statement names where parts come from. It is not a measurement of delivered energy, not a service record, and not verified independently here. |
| Console specification | Manufacturer's CoolMax Pro MultiPlex brochure: 3,000 W supply, 15.6" colour touch LED display, 220 V/50 Hz and 110 V/60 Hz, three handpieces on one chassis. | Supplier specification, not a tested result. Nothing in it describes a clinical outcome, and nothing in it states a cleared indication for any module. |
| Wavelength and filter set | Manufacturer's CoolMax Pro MultiPlex brochure, technical parameters: diode at 755/808/940/1,064 nm, Nd:YAG at 532/1,064/1,320 nm, and SHR filters at 480/530/590/640/690 nm with 560 nm and 750 nm listed as optional. | A wavelength list describes what the console can emit. It is not a measurement of delivered energy at the skin, and naming an indication beside a filter records the manufacturer's own labelling of that filter, not a cleared indication for it. |
| Product documentation | Current product documentation is provided with every quote. | Documentation supplied at quote time is not a clearance and is not a substitute for one. This page states no clearance for the diode, the flashlamp or the Nd:YAG, and none should be inferred from the console being sold in the United States. |
| Treatment lists | Every treatment named on this page describes how licensed providers use the platform. | Provider practice is not a cleared indication and not a claimed outcome. No patient result is claimed or guaranteed. |
Specifications are supplied by Solunis Medical. Treatment lists describe how licensed providers use the platform. No patient outcome is claimed or guaranteed. Current product documentation is provided with every quote. What it does give you is a manufacturer willing to publish its own parameter table, which is the document a clinical lead actually needs before a single setting is chosen.
What it costs to buy, and what it costs to run
A laser that sits idle loses money. The support around the device is what turns capital into revenue — handled by the same team that sources your pharmacy and biologics.
a laser that sits idle loses money, so I sell the install and the training as hard as the console.
- Price and financing
- Platforms like this do not carry a sticker price. Configuration, applicators, training and term all move the number, so the question that actually matters is the monthly. Most device financing here lands near $2,500 per month, pending configuration, credit approval, rates and terms. Tell us which treatments you want on the menu and we work the number back from the revenue they carry. Weighing the options? Read Buy vs. lease your first laser.
- Installation and site prep
- We support clinics in all 50 US states. Site prep, voltage and footprint checks are handled before delivery, and platforms run full-range 110–220 V, so they fit most US treatment rooms.
- Clinical training
- Hands-on protocols and KOL-backed education so staff are treating confidently from day one.
- Warranty and service
- Warranty and service terms are set by the manufacturer and vary by platform — the current terms are included in every quote. Eventide remains your single point of contact after installation.
- Upgrade path
- Start with a base platform and add handpieces or modules as the practice expands.
- Who supplies it
- CoolMax Pro MultiPlex is part of the CoolMax Pro series distributed by Solunis Medical. Eventide Aesthetics & Wellness is a United States distributor supplying it to licensed providers and practice owners — we handle the quote, the financing, the install and the training, and we stay your point of contact after the sale.
- Who it is sold to
- This is a business-to-business page. CoolMax Pro MultiPlex is sold to licensed medical providers and the practices they operate, not to consumers, and nothing here is directed at patients.
What buyers ask about the CoolMax Pro MultiPlex
Is financing available for the CoolMax Pro · MultiPlex?
Yes. Leasing and financing are structured to your practice so the platform pays for itself as it books. Every quote includes transparent pricing, financing terms, and an ROI view. If you are weighing purchase against a lease, start with our guide, Buy vs. lease your first laser.
Are training and installation included?
Yes. Site prep, voltage, and installation are handled — full-range 110–220V platforms fit most rooms — and clinical onboarding with hands-on protocols and KOL-backed education is included, so staff are treating confidently from day one. One point of contact covers quote, install, and training.
What about warranty and support?
Warranty and service terms are set by the manufacturer and vary by platform — the current terms are included in every quote. Eventide remains your single point of contact after installation, coordinating service and support with the same team that handles your other supply lines.
How much does a CoolMax Pro MultiPlex cost?
MultiPlex is the value end of the multi-technology segment — it puts three technologies on one chassis rather than requiring three purchases. We quote it against what a comparable three-device stack would cost you. Most practices ask for the monthly rather than the sticker, and device financing here typically lands near $2,500 per month, pending configuration, credit approval, rates and terms.
What are the three technologies in the MultiPlex?
A four-wavelength diode laser (755, 808, 940 and 1,064 nm firing from one 4 cm² applicator), an SHR handpiece with OPT square-wave delivery and seven swappable filters spanning 480 to 750 nm, and a q-switched Nd:YAG at 532, 1,064 and 1,320 nm. Fourteen selectable wavelength settings in total. Two of the SHR filters — 560 nm and 750 nm — are listed as optional by the manufacturer, so confirm which ones ship with your configuration.
What does SHR with OPT actually mean?
SHR is super hair removal — fast, lower-fluence stacked passes rather than single high-fluence shots. OPT is the pulse-shaping that makes it work: the lamp output is delivered as a uniform square wave with no leading energy spike or decay, which is what allows the higher repetition rate.
Who distributes CoolMax Pro MultiPlex in the United States?
Eventide Aesthetics & Wellness distributes CoolMax Pro MultiPlex to licensed providers and practice owners across all 50 US states. CoolMax Pro MultiPlex is part of the CoolMax Pro series distributed by Solunis Medical.
How do I buy CoolMax Pro MultiPlex for my clinic?
Start with a 15–20 minute call. We scope your space, budget and treatment menu, then send pricing, financing terms, spec sheets and an ROI view before you commit. After you order, site prep and installation are handled and your staff get hands-on clinical onboarding. Call 813-544-7131 or email justin@eventideaw.com.
Specifications reconciled against the manufacturer's CoolMax Pro MultiPlex brochure and reviewed 7 August 2026 by Justin Messner, Co-Founder, Eventide Aesthetics & Wellness. Regulatory status unchanged: no clearance is stated for any module.
Important information for providers. Eventide Aesthetics & Wellness is a distributor. Product specifications are supplied by Solunis Medical. Treatments listed describe how licensed providers use the platform. No treatment outcome is claimed or guaranteed. For licensed medical providers and practice owners.